|
Confused? In a dilemma to choose the best gate for industrial purpose! Let us help you out with few suggestions that may be handy to you. Check out few types of gates and may be you will be able to decide when you have done reading.
Industrial Sliding Gate - You don’t have space for a big swing gate for the wide entry for your industrial compound. Don’t worry a sliding gate is the solution to your problem. The gate can very easily fit in a small place taking minimum of the area. Sliding gates provide convenience of use and are suitable for high frequency use. Automates sliding gates offer full security and can be as wide as 12m (double leaf gates).
An industrial swing gate provides a completely different aura to the factory complex. With a range of designs and material to choose from you can make your complex stand apart from others in the area without compromising on security of the compound. The need for human effort also minimizes with the use of motor to operate the gate.
If you factory has a huge entrance and you are not wiling on compromise on the grand entrance’s image then you should be using Bi-folding gates. They are really efficient in industrial compounds having space constraints as one gate can cover double the space without actually taking much space to open or close. Bi-folding gate can comprise of a single foldable leaf or a pair of leaves both foldable. One panel of gates swings and the one slides in the leaf. Using these gates, you can enjoy the benefits of automated gates by using a remote control and need not worry about the security of your premises.
Cantilever Gates – If you own a factory where you risk your gate tracks being jammed by particles like stones, metals, extreme dust, etc. probably you should try our Cantilever sliding gates. As every industry doesn’t have a uniform base to install a gate. You can use Cantilever gates in such spaces without compromising with any of the security features. The gate leaf is supported by either a vertical steel shaft or is inserted firmly inside the wall pillar and is operated by the cantilever support carriage roller systems which make it suitable for the gate to be used frequently just like normal track sliding gate. The gate also gives an aesthetic look to the entrance and minimizes chances of any dysfunction as the base of suspended in the air. All other features like remote control, photo cells and other security enhancements are the same for Cantilever gates too.
With increasing space constraints there is a possibility that your compound doesn’t even have space for a double leaf sliding gate. Give a try to the Telescopic gates which have gained popularity in the past few years due to their sheer advantages in cases of space constraint. The gates can be fit to open both 6m and 12m entrances with minimum space for the opening of the gate. The gate has a drive system that controls the first leaf and a pulley system that pulls the second leaf just behind the first leaf. The control is very smooth and all modern security features can be installed on these gates.
|
